MDO is one of the most barn-quilt-friendly wood panels because it was developed for demanding painted applications. The smooth overlay reduces wood-grain telegraphing and gives you a stable surface for crisp geometric work.

Start by buying MDO intended for exterior exposure, ideally from a reputable panel manufacturer or sign supplier. MDO is available with overlay on one or both faces and may be sold factory-primed.

Cut the panel to size with ordinary woodworking tools. After cutting, ease sharp edges very slightly and remove dust. The freshly cut edges deserve special attention because the core is still plywood even though the face is overlaid.

For outdoor use, MDO manufacturers recommend painting the panel rather than leaving it bare. Current MDO guidance recommends a primer compatible with the finish system and two heavy coats of quality exterior paint on exposed panel edges. The Engineered Wood Association likewise describes MDO as an ideal painted-sign substrate and recommends quality primer and topcoat systems.

Prime the face if your panel and paint system call for it, and do not ignore the back and edges if it will be exposed to humidity or weather. Allow each coat to dry according to the product directions.

Once the base is ready, draw the grid lightly and paint the design with exterior acrylic paint. Avoid gouging through the overlay while drawing or sanding.

Any mounting holes should be planned so water cannot repeatedly enter unfinished wood. If you drill after painting, touch up exposed wood within the hole as appropriate for your mounting system.

MDO's big advantage is that it feels like woodworking while behaving more like a purpose-made sign panel. Treat the edges seriously and it can provide an excellent long-term barn-quilt substrate.