ACM is easy to drill and lightweight for its size, but it is not a thick wood board that happily accepts ordinary picture-hanging screws in the back. The mounting method needs to work with a thin composite panel.

For direct mounting, drilling through the ACM and fastening it to solid structure is simple and strong. DIBOND's fabrication guidance supports conventional drilling and fastening methods. Use corrosion-resistant hardware and washers where needed so the fastener head does not damage the panel face. Do not overtighten and distort the ACM.

French cleats are another common choice. They keep fasteners off the visible face and make removal easier. The challenge is attaching the cleat to the back of a thin panel. If you bond a cleat or hanger to ACM, use an adhesive system specifically rated for the panel materials, exterior exposure and load. A random craft adhesive should not be trusted for a large overhead outdoor installation.

For smaller pieces, mirror or panel clips can capture the edges without drilling the artwork. These can work especially well on fences or flat walls when the clips themselves are anchored securely.

Drilled holes also make it possible to use ties on gates or open metal fencing. Use ties that are rated for outdoor UV exposure, and remember that the gate now presents a larger sail to the wind.

On large ACM panels, temperature changes matter. Composite sign panels expand and contract, so the mounting system should not rigidly trap a large sheet in a way that encourages bowing.

Community makers use all of these methods successfully. The right choice depends on panel size, exposure and the structure behind it. If a failure could injure someone or damage property, use a mechanically secured system designed for exterior signage.